DIP SWITCH - ERD7 series

DIP SWITCH - ERD7 series

ERD7 SERIES
MINIATURE SIZE 7x3 ROTARY SWITCH


ERD7xxASxZ	ERD7xxAMxZ

FEATURES

Outer dimension 7.2mm square, 3.0mm high on board for through hole type, surface mounting type, and through hole reflow type.
Positions and switch code can be identified.
Gold plated contact area ensures reliable electric continuity for micro current.
Pin-out compatible with most of current equivalents.

SPECIFICATIONS

1.ELECTRICAL

Contact rating
Max. switching load	100 mA, 5 VDC
Min. switching load	10 A, 5 VDC
Contact resistance	Initial: 200 m Max.
Insulation resistance	100 M Min. at 100 VDC
Dielectric strength	250 VAC rms. for 60 seconds

2.MECHANICAL

Temperature rating
operating	-25 ~+70
storage	-25 ~+85
Operation force	510 gf-cm Max.
Mechanical Life	10,000 step.

INTRODUCTION to ECE ROTARY DIP SWITCH

SIZE	POSITIONS	CODE	PIN OUT	ROTOR	TYPE	PART NUMBER
7x7	08,10,16	REAL, COMPLEMENT	3:3	FLAT	STANDARD	ERD7xxxSxx
					RIGHT ANGLE	ERD7xxxRxx ERD7xxxFxx
					SMT	ERD7xxxMxx
					SMT IN T&R	ERD7xxxDxx

PART NUMBERING SYSTEM

ERD 7 XX X X X X Z
   | | | | | | | |
   | | | | | | | +--- Z:RoHS Compliant
   | | | | | | +--- Special number2
   | | | | | +--- Special number1:
   | | | | |      S:Spindle
   | | | | |      H:Slotted spindle
   | | | | +--- Setting:
   | | | |      S:Standard Type (Top Adjust Type)
   | | | |      R:Right Angle Type with
   | | | |        row spacing 2.54mm
   | | | |      F:Right Angle Type with
   | | | |        row spacing 5.08mm
   | | | |      M:Surface Mounting Type
   | | | |      D:Surface Mounting Type
   | | | |        in Tape & Reel Package
   | | | +--- Code:
   | | |      R:Real code
   | | |      C:Complement code
   | | |      A:Real code/Cross Shaped Slot Type
   | | |      B:Complement code/Cross Shaped Slot Type
   | | +--- Number of positions: 08,10,16
   | +--- Rotor: 7:7.2mmx7.2mm/H3.0mm
   +--- Series Name: ERD:Rotary DIP Switch

OPTIONS

1.Shaft (For Cross Shaped Slot Type Only)

DIMENSIONS AND CIRCUITRY