DIP SWITCH - EDG/EDS series

EDG/EDS SERIES
SLIDE TYPE (SLIDE WITH RIGHT ANGLE TYPE)

FEATURES

  • Tactile response is performed directly by larger contact pressure to ensure very stable contact.
  • All plastics are UL 94V-0 grade fire retardant.
  • Bottom epoxy sealed standard to ensure free of flux immersion during wave soldering.
  • Contact wiping on make and break.
  • Gold, Silver, or Tin plated contacts to ensure low contact resistance and long mechanical life.
  • Ideal for data processing, communications, remote controls and burglar alarm system use, where manual programming is required.

SPECIFICATIONS

1.ELECTRICAL

Contact rating
   switching 25mA, 24VDC
   non-switching 100mA
Contact resistance  
   initial 50m Max.
   after life test 100m Max.
Insulation resistance 1000M Min. at 100VDC
Dielectric strength 500VDC Min. for 60 seconds
Capacitance between adjacent switches 5pF Max.

2.MECHANICAL

Temperature rating
   operating -25 to + 70
   storage -40 to + 85
Operation force 800g Max.
Mechanical life 2000 operations
Humidity 95%RH, 40 for 96 Hrs.
Vibration Per MIL-STD-202F, method 204D
Solderability after flux 2305 for 50.5 seconds, 95% coverage
Resistance to soldering heat 2605 for 51 seconds

PART NUMBERING SYSTEM

  EDG 1 08 S X
   |  |  | | |
   |  |  | | +--- Blank:Standard
   |  |  | |      Z:RoHS Compliant(For EDS series only)
   |  |  | +--- Actuator and Sealing:
   |  |  |       S:Standard
   |  |  |       L:Low Profile Actuator
   |  |  |      LT:Low Profile and Tape Sealed
   |  |  |      ST:Standard and Tape Sealed
   |  |  +--- Number of positions:
   |  |       As Dimensions and Circuitry
   |  +--- Contact Forms:
   |       1.SPST  2.DPST  3.SPDT
   |       4.3PST  5.4PST  6.DPDT
   +--- Series Name:
        EDG:Gold Plated Contacts
        EDS:Silver or Tin Plated Contacts

CONSTRUCTION

edgs-con-s.gif

DIMENSIONS AND CIRCUITRY

OPTIONS

RIGHT ANGLE TYPE
  DIMENSIONS AND CIRCUITRY
  DIMENSIONS A IS SAME AS ABOVE

  PART NUMBERING SYSTEM

  EDG X XX X XX X X
   |  |  | |  | | |
   |  |  | |  | | +--- Blank:Standard
   |  |  | |  | |      Z:RoHS Compliant
   |  |  | |  | |        (For EDS series only)
   |  |  | |  | +--- Blank:Without Tape Sealed
   |  |  | |  |      T:With Tape Sealed
   |  |  | |  +--- RA:Right Angle
   |  |  | +--- Actuator and Sealing:
   |  |  |      S:Standard
   |  |  |      L:Low Profile Actuator
   |  |  +--- Number of positions:
   |  |       As Dimensions and Circuitry
   |  +--- Contact Forms:
   |       1.SPST  2.DPST  4.3PST  5.4PST
   +--- Series Name:
        EDG:Gold Plated Contacts
        EDS:Silver or Tin Plated Contacts

LOW PROFILE ACTUATORS

LOW PROFILE ACTUATORS AND TOP TAPE SEALED

    

SPECIAL TOP OR SIDE MARKING AVAILABLE