GENERAL CONTROL RELAY - ETR EML SERIES

GENERAL CONTROL RELAY
ETR EML SERIES

FEATURES

  • EML Series Relays are designed for switching capacity by 16A to comply with industrial control system use.
  • Slim type and low profile (29x12.6x15.7mm) is developed to provide end users with more flexibility in PC Board design.
  • 1 N/O contact with a tungsten pre-make contact.
  • Proper insulation distance is equipped to ensure EML will has a 5000 VAC dielectric strength between contact and coil.
  • Complete protective construction from dust and soldering flux is designed. If required, plastic epoxy resin sealed type is available for washing procedure.
  • 1 Pole 16A, 1 NO contact (W pre-mark contact + AgSnO 165A/20ms inrush peak current.

SPECIFICATIONS

Contact Specification:
Contact Resistance:

Max.100m at initial value.
Test Current: 1A, Open Circuit Test Voltage: 6VDC.
By using Voltage Drop Method.
Contact Capacity:

16 Amps at 250VAC Cos=1.
Tungsten Load: 2500W/250VAC

COIL SPECIFICATION AT 20oC)

Coil Sensitivity

 Nominal Voltage (VDC) Nominal Current (mA) Coil Resistance
(10%)		 Power Consumption (W) Pull-In Voltage (VDC)

Drop-Out Voltage (VDC)

 Max. Allowable Voltage (VDC)
EML
DC Coil		 3 130 23 Abt. 0.40 70%
Max.		 10%
Min.		 130%
5 80 63
6 67 90
9 44 203
12 33 360
15 27 563
18 22 810
24 17 1440
48 8 5760
60 7 9000

PART NUMBERING SYSTEM

  ETR EML-SS-1 12 D M Z
   |   |   | |  | | | |
   |   |   | |  | | | +--- Z:RoHS Compliant
   |   |   | |  | | +--- Contact Form:
   |   |   | |  | |      M:One Form A
   |   |   | |  | +--- Coil Type:
   |   |   | |  |      D:Standard DC Coil
   |   |   | |  +--- Coil Voltage:
   |   |   | |       03:3V,06:6V,12:12V,18:18V,48:48V
   |   |   | |       05:5V,09:9V,15:15V,24:24V,60:60V
   |   |   | +--- Number of Pole:
   |   |   |      1:One Pole
   |   |   +--- Type of Sealing:
   |   |        SS:Flow Solder Type
   |   |        SH:Plastic Sealed Type
   |   +--- Model Name: EML
   +--- Series Name: ETR

DIMENSIONS: UNIT:mm

ETR EML ¡@
¡@